ROLLFORMING AUSRÜSTUNG
Basisinformation
Modell: MR
Produktbeschreibung
No | Item | Parameter | Note | |
1 | Suitable
Material | Type | Pre-paint Steel |
|
Width | According to profile |
| ||
Thickness | 0.40—0.80mm |
| ||
2 | Product
Specs | Cover width | According to profile | Refer to drawing |
Wave height | According to profile | |||
Length | Any length | |||
3 | Machine
Material | Active shaft | No. 45 steel tempered | Up to final design |
Roller | No. 45 steel chrome plated | |||
Cutting Blade | Cr12 quenched | |||
4 | Power Requirement | Type | 380V/3PH/50HZ | Customized |
Main motor | 3kw | Up to final design | ||
Hydraulic | 3kw | |||
5 | Speed | forming speed | 20-25m/min | Excludes cutting |
6 | Hydraulic Cantilever Decoiler | Type | Hydraulic |
|
Max. capacity | 3000kgs | |||
Suitable coil OD | 1200mm | |||
Suitable coil ID | 508/610mm | |||
Max Coil width | 500mm | |||
Motor power | 2.2kw | |||
Hydraulic Power | 2.2kw | |||
7 | Forming Stand | About 14 group | Up to profile | |
8 | Transmission style | Chain, sprocket | Double row Entire chain | |
9 | Main machine structure | Guide Column |
| |
10 | Type of Cutting | length-set cutting | Hydraulic cutter | |
11 | Control System | Mitsubishi PLC& transducer |
| |
12 | Product support | Automatic stacker/ Simple run out table |
Produktgruppe : Metal Building Roll Former > Trapezgewölbte Umformmaschine